Fracture Point Graphics Cards: Minimum and Recommended GPU Specs Explained

Fracture Point graphics cards requirements are the first thing most players check before buying a fast-paced roguelike looter shooter, and in this case the bar is lower than you might expect. Kyrylo Burlaka's tower-climbing FPS asks for a GeForce GTX 1050 or a Radeon RX 590 at minimum, which means a surprising number of older gaming PCs can still run it. Because every run through the procedurally generated skyscraper is a single-life climb, though, stutter and frame drops hurt more than they would in a game with checkpoints. This guide breaks down the official Fracture Point graphics cards targets, what each tier actually means for your rig, and how to tell whether your GPU is enough.

Fracture Point Graphics Cards Requirements at a Glance

Fracture Point released on Steam on September 4, 2026, developed and published by Kyrylo Burlaka. The store page describes a first-person roguelike looter shooter with permadeath, procedural floors, and an extraction-style loot loop: clear a floor, decide whether to bank your gear at the base or push higher, and risk losing everything if you die. Fast-paced combat plus procedurally generated layouts is exactly the combination that makes a stable frame rate matter.

The official Fracture Point Steam store page splits the hardware requirements into two tiers. Here is how they compare:

Source: Fracture Point Steam store page (store.steampowered.com/app/3560110/Fracture_Point/), system requirements as captured 2026-09-23.

Two details stand out immediately. The game targets DirectX 11 rather than DirectX 12, and there is no mention of ray tracing or mandatory upscaling — both signs that the renderer was built to run across a wide range of hardware. The storage note is also unusually blunt: an SSD is required on both tiers, not merely suggested.

Player reception has been positive so far. As of 2026-09-23, the Steam store page recorded a "Very Positive" summary from 166 user reviews, 82% of which were positive. The page's review filter panel displayed a broader all-review-type total of 171 entries, which includes 5 reviews from non-purchasers, so the 166 figure reflects Steam purchasers specifically. The same page listed Fracture Point at $19.99 as captured on that date.

The game first drew attention with a reveal trailer published by IGN on March 13, 2025. In community reports under that trailer, viewers compared its pace to Mullet Mad Jack and F.E.A.R.

What the Minimum GPU Tier Really Asks of You

The minimum Fracture Point graphics cards tier names two very different cards. The GeForce GTX 1050 and the Radeon RX 590 are not performance equals — the RX 590 is a considerably more capable GPU — so "minimum" covers a wide band of hardware rather than one precise performance floor.

That asymmetry is useful when you are deciding whether to buy. If your machine has something in the RX 590's neighborhood or better, you sit comfortably inside the developer's stated floor. If you are running a GTX 1050-class card, you are at the very bottom of the supported range, and the rest of the minimum list matters more:

• 8 GB of RAM is the memory floor, shared with your operating system and everything else running.
• An Intel Core i5-3470 or AMD Ryzen 3 1200 is required, so a strong GPU paired with a much weaker processor falls outside the stated configuration.
• 12 GB of free space on an SSD is a hard requirement on both tiers.

Notice that the minimum CPU list reaches back further in product generations than the minimum GPU list. That is worth checking against your own build before you assume a GPU upgrade alone will fix everything.

The Recommended Tier and Where Fracture Point Graphics Cards Targets Land

The recommended configuration pairs a GeForce GTX 1660 Ti or Radeon RX 5700 XT with 16 GB of RAM and a Core i5-6600 or Ryzen 3 3100. In practical terms, this is the recommended Fracture Point graphics cards target — the configuration the developer expects players to aim for.

Recommended tier checklist:

• GPU: GTX 1660 Ti / RX 5700 XT or better
• CPU: i5-6600 / Ryzen 3 3100 or better
• RAM: 16 GB
• OS: Windows 10 64-bit
• Storage: 12 GB on an SSD

One caution about the recommended GPU pairing: the RX 5700 XT is a substantially stronger card than the GTX 1660 Ti. That gap is common in spec sheets, and it means "recommended" describes a range, not a single performance point. If you are shopping for a card, treat the weaker of the two listed GPUs as the floor of that tier and anything above it as headroom.

DirectX 11, SSD Storage, and the Specs Players Skip

Most graphics card conversations focus on the GPU and ignore everything else, which is a mistake here.

DirectX 11 support. The Fracture Point graphics cards requirements make no mention of DirectX 12 Ultimate features or hardware ray tracing. Any GPU with DX11 support clears that particular bar, which is a long list stretching back several hardware generations.

SSD required. The store page lists "SSD is required" as an additional note on both the minimum and recommended tiers. If your library lives on a mechanical hard drive, plan on changing the install location.

Storage footprint. 12 GB is small by modern standards, so raw capacity is rarely the constraint. Drive type and free space are.

Windows 10 64-bit. Both tiers specify a 64-bit operating system. There is no 32-bit path listed.

Steam Deck Playability and Handheld Reality

As of 2026-09-23, the Steam store page lists Fracture Point as "Playable" on Steam Deck. That is Valve's middle compatibility tier rather than "Verified," so it is worth reading the compatibility notes before assuming a frictionless handheld experience. Combined with the modest requirements, though, the rating does suggest the game scales down to low-power hardware instead of demanding a full desktop tower.

The store page also notes Xbox and PlayStation controller support, 18 Steam Achievements, and Family Sharing. English is the only language with full audio, while the interface and subtitles are available in 13 additional languages, including French, Italian, German, Spanish (Spain), Czech, Japanese, Korean, Polish, Portuguese (Brazil), Simplified Chinese, Turkish, Ukrainian, and Russian.

FAQ: Fracture Point Graphics Cards Questions Answered

What graphics card do I need for Fracture Point? As captured on 2026-09-23, the Steam store page lists a GeForce GTX 1050 or Radeon RX 590 as the minimum and a GeForce GTX 1660 Ti or AMD RX 5700 XT as recommended. The recommended tier also raises RAM from 8 GB to 16 GB and the CPU target from a Core i5-3470 / Ryzen 3 1200 to a Core i5-6600 / Ryzen 3 3100.

Do the Fracture Point graphics cards requirements guarantee a specific frame rate? No. Published specs describe supported configurations, not measured performance. The sources reviewed here contain no frame-rate benchmarks, so treat the recommended tier as the configuration the developer targets rather than a promise of any particular FPS number. Check the game's Steam page and community performance discussions for measured results.

Does Fracture Point require an SSD? Yes. Both the minimum and recommended tiers carry an "SSD is required" note alongside 12 GB of available storage space.

Is Fracture Point playable on Steam Deck? As of 2026-09-23, the Steam store page lists Steam Deck compatibility as "Playable," which sits below "Verified." Check the compatibility details on the store page before purchasing.