Fracture Point Controller Bindings: Setup, Reset, and Fixes Guide

Why Your Gamepad Setup Matters Before You Climb

If your pad goes dead on a procedurally generated floor, Fracture Point controller bindings are the first thing worth checking. Fracture Point is a first-person roguelike looter shooter with permadeath, so a single missed reload, interact, or heal input can end a run and wipe everything you were carrying. The developer added a dedicated controller-support update on September 15, 2026, and the fixes below cover the failure cases that update actually documents.

Fracture Point launched on September 4, 2026, from solo developer and publisher Kyrylo Burlaka, and the Steam store page carried an All Reviews rating of "Very Positive" — 82% of 166 user reviews — in the page snapshot captured on September 23, 2026. The game leans on inventory management, manual magazine loading, and tension between banking loot at base or pushing higher, which is exactly the kind of loop where reliable Fracture Point controller bindings keep you alive.

What Controller Support Fracture Point Actually Offers

The Steam store page lists two controller categories under the game's features: Xbox Controllers and PlayStation Controllers. That listing, together with the Steam Deck compatibility rating of Playable, was recorded in the store page capture dated September 23, 2026.

That is the full extent of what the official store listing states. It does not publish a button-by-button default map, so nobody can honestly hand you a table of "default" face-button assignments from official material — you'll read the live map in the game's own controls menu, where it can be changed and reset.

What the patch history does confirm is that bindings are customizable. Update 15, released September 15, 2026 (build 25333327), added the ability to return every keyboard and controller binding to its default values — an option that only makes sense if the game lets you change them in the first place.

How to Reset Fracture Point Controller Bindings to Default

If you've experimented with a custom layout and something now feels broken, the reset path is the cleanest fix. Update 15, dated September 15, 2026, specifically added an option to restore all keyboard and controller bindings to their defaults.

1. Launch Fracture Point and open the options or settings menu.
2. Navigate to the controls or key bindings section.
3. Use the reset option added in the September 15, 2026 update to restore every keyboard and controller binding to default.
4. Restart the game if the change doesn't take effect immediately.

This is also the right move when you inherit a save or a config from a previous session and can't remember which button you remapped. Restoring defaults gives you a known baseline before you start tuning Fracture Point controller bindings again.

Fixing a Controller That Doesn't Respond In-Game

The developer shipped explicit troubleshooting notes alongside Update 15 on September 15, 2026. They describe a two-step toggle rather than a single universal setting, so work through both states before assuming your hardware is the problem.

• If you're using a PlayStation or Xbox controller: make sure Steam Input is disabled, then restart the game.
• If that doesn't help: enable Steam Input and confirm the selected preset is "Gamepad" — not "Keyboard and Mouse."
• If vibration is missing on a PlayStation controller: the developer attributes this to a Unity engine limitation when the pad is connected over Bluetooth, and recommends a wired connection instead.

The order matters. A controller that ignores all input is usually a Steam Input conflict, not a dead battery, and toggling the layer in the opposite direction is what the patch note tells you to try. Only after both states fail should you suspect the pad itself.

Steam Deck and Fracture Point Controller Bindings

The Steam store page snapshot dated September 23, 2026 records a Steam Deck compatibility status of Playable for Fracture Point. Steam Deck's built-in controls and external gamepads both route through Steam Input, which is the same layer the developer's September 15, 2026 notes reference — so if inputs misbehave on Deck, the "Gamepad" preset check described above is the relevant starting point.

Steam Deck users also benefit from the reset option: if a community controller template or a borrowed layout leaves your Fracture Point controller bindings scrambled, restoring defaults puts you back on a configuration the developer actually tested against.

Practical Tips for a Stable Setup

• Decide on your layout before a serious run. Fracture Point's permadeath means there's no safe moment to re-learn buttons mid-climb.
• Keep a wired cable handy if you play on a PlayStation pad, per the developer's Bluetooth vibration note from September 15, 2026.
• Test any change on an early, low-risk floor rather than deep in the tower where loot value — and threat level — are highest.
• If a preset switch doesn't register, fully restart the game rather than only returning to the main menu; that's the step the patch notes specify.
• Remember that the store page's "Playable" Deck rating, recorded on September 23, 2026, is a snapshot; re-check the live page for the newest status.

For the canonical feature list and any newer controller notes, see Fracture Point on the Steam store, and the Update 15 controller support patch note on SteamDB for the original developer wording.

FAQ

Does Fracture Point support controllers? Yes. The Steam store page lists Xbox Controllers and PlayStation Controllers among the game's features and showed a Steam Deck compatibility rating of Playable in the page snapshot captured on September 23, 2026. Fracture Point controller bindings therefore work without third-party remapping tools in most cases.

How do I reset Fracture Point controller bindings to default? Update 15, released September 15, 2026 (build 25333327), added an option to reset all keyboard and controller bindings back to their default values. Open the game's settings, find the controls section, and use that reset option.

Why is my controller not working in Fracture Point? According to the developer's notes attached to the September 15, 2026 update: with a PlayStation or Xbox controller, disable Steam Input and restart the game. If that doesn't fix it, enable Steam Input and set the preset to "Gamepad" instead of "Keyboard and Mouse."

Why doesn't my PlayStation controller vibrate in Fracture Point? The same September 15, 2026 patch notes attribute missing vibration to a Unity engine limitation when the controller is connected over Bluetooth, and recommend a wired connection. This is a hardware-connection issue, not a binding problem.